How To Ride An Electric Skateboard


How To Ride An Electric Skateboard – An Essential Beginner’s Guide

Regular skateboards and electric skateboards initially have a similar appearance. The electric board features one or more motors that are powered by batteries, which is the main distinction. The board is controlled with a remote control that has many buttons and a throttle for braking and acceleration. Some have an LED display that provides crucial data like riding mode, speed, battery life, and more.

Electric skateboards are often significantly quicker than conventional skateboards since they include motors. Even many of the more cheap alternatives nowadays can go faster than 20 MPH. With a motorized board, it is also simpler to travel further and uphill. The final major distinction is that most tricks are more difficult since the electrical components (especially the batteries and motors) weigh down the board. We’ll discuss skating maneuvers that are compatible with electricity.

How To Ride An Electric Skateboard

Learning to skateboard will be more difficult if you are just starting out. What you should do is:

  • Step 1: Put on the appropriate safety gear.

You must put on the proper gear before using an electric or traditional skateboard. This consists of a properly fitting helmet, wrist guards, elbow pads, and knee pads. Skateboarding frequently results in wrist injuries because, when you fall, you almost certainly reach out to catch yourself. Always wear a helmet that is snug, but not so tight that it aches, as head injuries can be quite serious. Don’t tilt it back; it should lie flat on your head with the front portion just over your eyebrows.

  • Step 2: Verify your settings and trucks

Two metal components called skateboard trucks are attached to the deck’s bottom. One is in the front, and one is in the back. It’s a good idea to make sure your trucks are nice and tight if you’re just starting off. This will enable you to maintain your balance more steadily and lessen speed wobbles. You may gradually loosen them as your skill level rises for greater flexibility and more precise rotations.

  • Step 3: Pick a skateboarding position.

If you’ve skateboarded before, you probably already have a natural posture that feels secure to you. If you snowboard, you may also use your stance. The two most common poses are normal and silly. Regular means positioning your left foot in front of the board’s nose. Leading with your right foot is goofy. Since most individuals are right-handed, it’s typical to lead with the left foot. However, this does not imply that if you are a right-handed person, the standard posture is necessarily the most comfortable. There is no “correct” attitude; instead, choose the one that feels the most secure to you

  • Step 4: begin riding

Ride time has here! As you would while riding a standard skateboard, we advise beginning your skateboard with a kick-push. Although it is not required (you can just turn on the motors with your remote), pushing off with one foot while keeping the other firmly planted on the board improves balance.

  • Step 5: Master turning

How do you maneuver a skateboard while turning? If you are unfamiliar, it may take some practice. If you are, turning on a standard board is equivalent. Turns can be made either heelside or toeside. Heelside will turn you left and toeside will turn you right if you’re in a standard posture. If you’re assuming a silly position, it’s the opposite.

  • Step 6: Braking

On an electric skateboard, proper braking is crucial. Fortunately, it’s very straightforward because you use your remote to operate the braking system. Since your weight will naturally shift forward when you stop, you should first lean back a little. Backward slanting counteracts that motion. While maintaining a tiny bend in your knees, make sure your front foot is solid and somewhat firm. Use your remote to gradually slow down before braking.

  • On an electric skateboard, are tricks possible?

E-skateboards are heavier than conventional skateboards, as we already explained because of the motors and batteries. Additionally, the weight distribution might occasionally be severely unbalanced (some boards are very front-or-rear-heavy). Tricks become more challenging as a result, particularly those that require flipping the board into the air.

  • Crossing over

It’s a wise move for electric longboards to do this. Your front foot should now be in the center of the board. To uncross your legs, place your rear foot in front of your front foot and cross it beneath the front foot. You will stand just on your left foot and solely on your right foot at various moments during this motion. Your position will determine the order.

  • Slash The Wood

Start off in your usual position. Move one foot to the front edge of your board and point it forward to accomplish the feat. Be ready since this will slightly rotate the board. For balance, slightly flex your knees, then lift your other leg into the air off the board. To finish the motion, lower your leg back to the deck.

Choose An Electric Skateboard

An electric longboard is a fantastic option if the concepts of the stunts we discussed and other dance techniques appeal to you. You have plenty of room to move your feet around on these longer decks. An off-road electric skateboard with great broad trucks and strong motors would work well if you reside in a more remote region. These are the top three things to think about when shopping:

  • Range and speed

How far and how quickly can you travel on an electric skateboard? Electric skateboards with peak speeds of 10 to 30 mph are widely available. High-speed skateboards are more expensive since they require more power. The same is true for range, which can vary from 5 miles to 31 miles per charge (and even beyond for some of the freakiest models out there).

  • Construction

Is the skateboard a durable model? Aluminum, ABS plastic, and wood are some of the materials used to make electric skateboards. For decks, maple and bamboo are frequently utilized. Usually, the wood is layered together to increase strength without reducing flexibility. If you reside in a wet environment, look for characteristics like waterproofing as well.

  • Technology

All electric skateboards include remote controls, however the more affordable models tend to be somewhat basic. If you want cutting-edge technology, opt for an e-board that has numerous riding modes and applications that let you link the board to your phone. Although it’s not always included on the least expensive boards available, an LED display on the remote that indicates speed and battery levels is also quite helpful.


Skateboarding with an electric motor amplifies the enjoyment of a traditional activity. It’s possible to travel farther and quicker than on a traditional skateboard, making it a viable alternative for both leisurely trips and quick journeys. The shift from a traditional skateboard to an electric one is not too challenging.

This article should have helped beginners understand the basics of riding an electric skateboard. Wear safety equipment at all times, regardless of your degree of experience, and pay attention to your surroundings. Your electric skateboard will be lot more enjoyable for you.

Rate this post

Be the first to comment

Leave a Reply

Your email address will not be published.