Contents
How to dance on longboard – ultimate guide
Have you ever wonder how to dance on longboard? Look no further; today’s article will provide you with a longboard dancing guide to assist you in determining what you need to do.
I’ll go through everything from the many types of boards you’ll need to some helpful tutorials.
What exactly is longboard dancing, and how do you get started?
Longboarding dance entails jumping on your board in a variety of ways, incorporating some showy motions, and ensuring that everything flows smoothly.
There are several distinct varieties of longboards, each of which is best suited to a specific discipline. If you acquire the wrong board, you won’t have enough room to do footsteps, the deck will turn too quickly, the wheels will roll too slowly, and the kicktail will be missing.
In short, you must be cautious in your selections. To learn more about the best type of deck for dancing, see my guide below.
What kind of longboard do you need for longboarding?
The size of the deck should be appropriate.
The majority of longboards are 36-40 inches in length. Longboards for dance are often substantially longer, ranging in length from 40 to 48 inches. They’re usually this length so you have enough room on the deck to do cross-steps and other moves.
Finally, the extra length allows for a smoother turn. They aren’t particularly nimble, but they have a soft turn that makes them simple to ride and balance on.
Most freestyle decks are around 40 inches long. This not only allows you more room to dance on them, but it also makes them lighter and simpler to pick up and fling around.
There should be some flex in the deck as well.
When a board flexes beneath your weight, it’s called flex. It’ll be present on most dance boards in some form.
It’s up to you how much flex you want in a board, but most dancers prefer flexy boards. As a beginning, you should aim for this.
Flex helps you to perform a lot of walking without having to put any effort into your trucks. When you’re doing quick footwork across the board, it allows the board to feel sturdy and not too jittery.
Different flexes for the same board are common among board manufacturers. Because flex changes based on your weight, this is the case. If you’re light, you’ll want the softest flex possible. The stiffer flexes will be more suitable if you’re hefty. When purchasing a relevant board, make sure to read the product guides.
What effect do trucks have on the ride?
Longboard dancing trucks should be about 180mm wide and have a baseplate angle of 50 degrees. These two factors will give the trucks a more vibrant appearance. They’ll be able to turn a lot, but their lean will be quite smooth. It will be simple to hold turns on these, and the trucks will not twitch suddenly when you take fast steps.
What about the tires and wheels? Will any of these suffice?
You’ll need a wheel that can spin swiftly and endlessly for dancing. Wheels that are capable of doing this often have a large diameter and are composed of high-quality urethane (urethane is the rubbery material that the wheel is made from).
A wheel with a large diameter can maintain its speed and momentum. Even after a slight push, it will continue to roll indefinitely. This will allow you to make a lot of moves without having to slow down your board too much. You’ll need a wheel that’s between 66 and 70mm tall.
Finally, a high-quality urethane will enable the wheels to roll quickly and consistently. This is impossible with low-quality, low-rebound wheels. Low-quality wheels react similarly to flat tires, preventing them from getting up speed and moving quickly. Quality wheels are like air-filled tires. They will readily pick up and maintain speed. Most reputable brand wheels will be high-quality and suitable for dancing.
How about the parts?
If you buy high-quality boards, the components will almost certainly be top-of-the-line, so you won’t have to replace anything. The only substantial adjustment you’ll need to do is replace the bushings, which isn’t a big deal for most folks. And, despite the fact that I’ve mentioned it, it’s not something to be concerned about unless you’re a superlight rider.
What are any decent longboard dancing tutorials?
You should start learning to dance now that you have your board. But, before you go too far, be sure you understand the fundamentals of riding.
Longboard dance tricks are simple to learn.
The cross step is a simple trick to progress to once you’ve mastered cruising.
What is the best place for you to practice?
What you need is a smooth flat space, that has enough room for you to turn and skate a considerable distance. Consider the following locations:
- There is no one in the parking lot.
- Basketball court with no one on it.
- Your neighborhood’s streets are deserted.
- Vacant schoolyards, for example.
- How to carry a longboard on a backpack
- Best Abor Longboard
- landyachtz longboard review
- atom drop through longboard review
- BEST ELECTRIC LONGBOARD UNDER 300
My Personal Experience
In terms of balance, I consider myself to be ordinary to below-average. While snowboarding, I can barely handle blue runs and have never skateboarded.
It took me about 30 minutes to get comfortable pushing and cutting the board. I’d lose my balance and have to bail out occasionally, or the board would get away from me.
Then there was the stepping backwards and forwards. It took another excellent session just to mentally prepare myself to commit to crossing my back leg over my front leg. Once it began to happen, I realized it wasn’t all that difficult, and I continued to practice. I fell a few times on my hip and back, but it was unavoidable.
It took four 30–45 minute sessions for me to master the rudiments of a cross step. I have to take it slow and steady, and I am not always smooth. Peter Pan is still on my to-do list. Overall, I’m still excited about it and had a great time doing it. I’d like to learn a couple additional tricks (shuvits and switch cross steps) and improve my naturalness.
Leave a Reply